HV590 Series High Performance Closed-Loop Vector Frequency Inverter

Inverter model

Item

Specifications

Basic function

Control system

High performance of current vector control technology to realize asynchronous motor and synchronous motor control

Drive performance

High efficiency driving for induction motor and synchronous motor

Maximum frequency

Vector control：0~300HzV/Fcontrol：0~3200Hz

Carrier frequency

0.5k~16kHz;thecarrierfrequency will be automatically adjusted according to the load characteristics

Input frequency resolution

Digital setting： 0.01Hz

Analog setting： maximum frequency ×0.025%

Control mode

Open loop vector control(SVC)

Closed loop vector control(FVC)

V/F control

Startuptorque

Type G：0.5Hz/150%(SVC)；0Hz/180%(FVC)

Speed range

1：100(SVC)

Speed range

Speed stabilizing precision

±0.5%(SVC)

Speed stabilizing precision

Torque control precision

±5%(FVC)

Over load capability

G type： rated current 150% -1 minute, rated current 180% -3 seconds;

Torque boost

Auto torque boost function；Manual torque boost 0.1%~30.0%

V/Fcurve

LinearV/F,Multi-point V/Fand Square V/F curve (power of 1.2, 1.4, 1.6, 1.8, 2)

V/F separation

In 2 ways：separation ,semi seperation

Acc. /deccurve

Straight line or S curve acceleration and deceleration mode.

Four kinds of acceleration and deceleration time. Acceleration and deceleration time range between 0.0s to 6500.0s

DC brake

DC brake frequency：0.00Hz to maximum frequency,brake time：0.0s to 36.0s, and brake current value： 0.0% to 100.0%.

Jog control

Jog frequency range：0.00Hz~50.00Hz. Jog acceleration/deceleration time 0.0s~6500.0s.

Simple PLC and MS speed running

It can realize at maximum of 16 segments speed running via the built-in PLC or control terminal.

Built-in PID

It is easy to realize process-controlled close loop control system

Auto voltage regulation (AVR)

It can keep constant output voltage automatically in case of change of network voltage.

Over-voltage/current stall control

It can limit the running voltage/current automatically and prevent frequent over-voltage/current tripping duringthe running process

Quickcurrent limit

Minimize the over-current fault,protect normal operation of the inverter

Torque limit & control

“Excavators" characteristics,automatically limit torque during operation,prevent frequent over-current trip;

Closed loop vector mode can realize the torque control.

Personalized

Instantaneous stop

non-stop

When instantaneous power off,voltage reduction is compensated through load feedback energy,which could make inverter keep running in a short period of time.

Rapid current limit

To avoid inverter frequent over-current fault.

Virtual IO

5 groups of virtual DI,DO to realize simple logic control

Timingcontrol

Timing control function：settimerange0Min~6500.0Min

Multiple motor switch

4 groups of motor parameter,which can realize 4-motor switch control

Multi-threaded bus support

Support 3 kinds of field bus：RS485, Profibus-DP, CANopen

Motor overheat protection

Select optional H5PC1 analog input AI3x can accept the motor temperature sensor input(PT100、PT1000)

Multi-encoder support

Support difference,open collector, UVW, rotary transformer, sine cosine encoder etc.

Programmable PLC

Select optional user programmable card,which can realize secondary development,programming mode compatible with Drino PLC.

Excellent backend software

Support inverter parameter operation and virtual oscilloscope function.Inverter internal state graphic monitor can be realized through virtual oscilloscope.

Running

Running command channel

Three types of channels：operation panel reference,control terminal reference and serial communication port reference.These channel scan be switched in various modes.

Frequency source

There are totally eleven types of frequency sources, such as digital reference, analog voltage reference, analog current reference, pulse reference, MS speed, PLC, PID and serial port reference.

Auxiliary frequency source

11 kinds of auxiliary frequency source which can flexible achieve auxiliary frequency tuning, frequency synthesis

Input terminal

Standard：

There are 6 digital input terminals,DI5 can be used as100kHz high-speed input pulse.

2 analog input terminals which can be used as 0-10V voltage input or 0~20mA current input.

Extended function：

4 digital input terminals,

1analog input terminals support-10~10V voltage input &PT100PT100

Output terminal

Standard：

1 digital output terminals, Y1 is high-speed pulse output terminal (can be choosen as open circuit collector type), support 0~10kHz square wave signal;

2 relay output terminal;

2 analog output terminals, support 0~20mA output current or 0~10V output voltage;

Extended function：

2 digital output terminal;;

1 analog output terminal, support 0~20mA output current or 0~10V output voltage.

Keyboard operation

LED display

Realizeparameter setting,statusmonitoringfunction

Keyboard potentiometer

Equipped with keyboard potentiometer or coding potentiometer

Key lock&function selection

Realize button locking,define operation range for part of buttons to prevent operation fault.

Protection function

It can implement power-on motor short-circuit detection,input/output phase loss protection, over current protection,over voltage protection,under voltage protection,overheating protection and overload protection.

Optionalparts

Liquid crystal display operation panel, brake component, multi-function extended card (1.IO extended card 2.user programmable card), RS485 communication card, Profibus-DP communication card, CANopen communication card, differential input PG card, UVW differential input PG card, rotating inverter PG card, OC input PG card.

Environment

Using place

Indoor,and befreefromdirectsunlight,dust,corrosivegas, combustible gas,oilsmoke, vapor,driporsalt.

Altitude

Below 1000m

Ambient temperature

-10 ℃ to +40 ℃ (Derating use when under ambient temperature of 40 ℃ to 50 ℃)

Humidity

Less than 95%RH, without condensing

Vibration

Less than 5.9 m/s2(0.6g)

Storage temperature

－20℃~＋60℃